None available at this time.
The Building Construction Technology program prepares students to build and repair structures to comply with existing codes. Students learn to read blueprints, sketches, and specifications for information pertaining to dimensions, type of materials required, and standards of work. Experience is gained working with a variety of hand tools, power tools, and construction equipment. Skills learned in the program include wood and metal framing, concrete forming, remodeling, and interior and exterior finishing of residential and commercial buildings. The courses in the second year of the program are offered at an off-campus building site. The second year students build a residential structure from the initial site layout through all the construction phases to the final finish work. An 18-credit liberal education component diversifies the student?s training and enhances transfer opportunities to other institutions.
• Erect concrete forms for footings, walls, columns, and flat work.
• Frame floors, walls, and roofs using wood and steel framing.
• Install exterior finish components.
• Estimate building materials requirements.
• Coordinate construction activities.
• Perform construction duties safely.
• Install interior finish components.
Click on Course Title for Course Description - Opens in new window
|BLDG1400||4||Construction Safety||This course covers the safe operation of hand, portable, and stationary tools used in the industry. This course covers the basic requirements set by the OSHA legislation and provides students with basic hazard identification and abatement techniques. This course covers scaffolding and ladders used in the construction industry. The student will demonstrate proper use of various types of wooden job-built and commercial scaffolds, ladders, and safe use of these types of equipment. (Prerequisites: None) (2 hrs lec/4 hrs lab/0 hrs OJT)|
|BLDG1407||3||Concrete Forming||This course covers forming procedures for concrete structures. Job-site built and commercial forming systems will be used. Concrete design and usage will be covered. (Prerequisites: BLDG1400 or concurrent enrollment) (1 hr lec/4 hrs lab/0 hrs OJT)|
|BLDG1412||2||Basic Framing I||This course is an introduction to wood framing for residential structures including foundations, floors, and walls. This course will also cover the various materials and fasteners used in the construction industry. This course covers all the basic information necessary to calculate and assemble a basic common and/or hip roof combination in the construction of a small building. (Prerequisites: BLDG1400, ENGL0450, MATH0450, and READ0465; or concurrent enrollment) (1 hr lec/2 hrs lab/0 hrs OJT)|
|BLDG1414||3||Basic Framing II||This course is used in conjunction with BLDG1412. This class will be a skill-building lab designed to produce a competent person at basic framing. Class time will be spent performing hands-on lab to build skills and knowledge in basic framing. (Prerequisites: BLDG1412 or concurrent enrollment) (0 hrs lec/6 hrs lab/0 hrs OJT)|
|BLDG1415||2||Cabinets and Laminates||This course covers the design, construction, and operation for finishing of residential cabinets. The student will become acquainted with both custom and manufactured cabinets. (Prerequisites: BLDG1400 or concurrent enrollment) (0 hrs lec/4 hrs lab/0 hrs OJT)|
|BLDG1425||1||Estimating for Building Construction||This class is designed for technical college students pursuing a career in building construction. This course covers how to make fast accurate estimates of construction material. The student will be introduced to the methods used to calculate material used by the carpenter or contractor. This will also cover estimating using a computer application. (Prerequisites: BLDG1435 or equivalent or concurrent enrollment and MATH1430, or equivalent) (0 hrs lec/2 hrs lab/0 hrs OJT)|
|BLDG1430||1||Building Site Lay-Out||This course covers the proper use of the builder's level, transit, and other related survey instruments as it relates to the construction industry. (Prerequisites: None) (0 hrs lec/2 hrs lab/0 hrs OJT)|
|BLDG1435||3||Blueprint Reading||This course covers the basics on interpreting and reading architectural drawing for the construction industry both in residential and commercial construction. They include but are not limited to: electrical, mechanical, painting, etc. (Prerequisites: None) (1 hr lec/4 hrs lab/0 hrs OJT)|
|BLDG1440||3||Stair Design and Construction||This course covers basic stair layout and design for the beginning stair builder. The student will assemble a stairway to a deck using the training applications studied in the course. (Prerequisites: BLDG1400 or concurrent enrollment) (1 hr lec/ 4 hrs lab/0 hrs OJT)|
|BLDG1450||3||Interior/Exterior Construction||This course covers the basics in assembly of interior and exterior trim materials in residential construction. This course also covers the introduction to heat loss calculation, product selection, and safe installation of insulation and drywall products. (Prerequisites: BLDG1400, BLDG1412, or concurrent enrollment) (0 hrs lec/6 hrs lab/0 hrs OJT)|
|BLDG1465||2||Framing with Metal||This course covers framing with metal for residential and commercial construction. (Prerequisites: BLDG1400, BLDG1412, or concurrent enrollment) (1 hr lec/2 hrs lab/0 hrs OJT)|
|BLDG2414||4||Site Preparation and Foundation||This course covers the lay-out of the building site, excavation for the foundation, forming of the footings and foundation walls, placement of reinforcing steel, estimating and placement of the concrete, installation of foundation drainage systems, and backfilling the foundation. This course will be held at an on-site project location. (Prerequisites: BLDG1407) (1 hr lec/6 hrs lab/0 hrs OJT)|
|BLDG2415||3||Floor and Wall Framing||This course covers residential floor and wall framing. This course will be held at an on-site project location. (Prerequisites: BLDG1412) (0 hrs lec/6 hrs lab/0 hrs OJT)|
|BLDG2420||3||Roof Framing||This course covers roof and ceiling framing using sawn lumber, manufactured framing components, and trusses. Framing components will be designed, constructed, and installed, braced, and sheathed. This course will be held at an on-site project location. (Prerequisites: BLDG1412) (1 hrs lec/4 hrs lab/0 hrs OJT)|
|BLDG2425||2||Understanding Working Drawings||This course covers the estimating, scheduling, and plan review of construction drawings for construction of an actual site built project. The project drawings will be the drawings to be studied during the course and the estimating, scheduling, and plan review will use those drawings, and others supplied by the instructor. (Prerequisites: BLDG1425) (1 hr lec/2 hrs lab/0 hrs OJT)|
|BLDG2430||2||Sound and Energy Control||This course covers the heat loss in buildings, moisture problems and prevention, installation of insulation types, indoor air quality, and sound control. This course will be held at an on-site project location. (Prerequisites: BLDG1450) (1 hr lec/2 hrs lab/0 hrs OJT)|
|BLDG2435||4||Exterior Finishing||This course covers construction of exterior finishes for residential construction including siding, cornices, roofing, attic ventilation, and window and door installation. This course will be held at an on-site project location. (Prerequisites: BLDG1450) (1 hr lec/6 hrs lab/0 hrs OJT)|
|BLDG2440||2||Stair Construction||This course covers stair construction including design, layout and cutting stringers, and assembly of the stairway. Installation of wall and floor coverings will be presented. This course will be held at an on-site project location. (Prerequisites: BLDG1440) (1 hr lec/2 hrs lab/0 hrs OJT)|
|BLDG2445||2||Introduction to Construction Management||This course covers job coordination, scheduling, preparation and presentation of weekly progress reports, expediting of materials, insurance, and Minnesota Contractor's License requirements. Accounting requirements of construction projects will be addresses. Basic design problems will be covered. (Prerequisites: None) (1 hr lec/2 hrs lab/0 hrs OJT)|
|BLDG2450||6||Interior Finishing/Casework||This course covers interior finishing systems, including drywall, installation of interior doors, window and door trim, base, hardware, suspended ceilings, closet shelving, and installation of kitchen and bathroom cabinets and counter tops for both new construction and remodeling projects. This course will be held at an on-site project location. (Prerequisites: BLDG1450) (1 hr lec/10 hrs lab/0 hrs OJT)|
|FYE1000||1||Student Success Seminar||This course is mandatory* for students in their first semester at Lake Superior College. It provides a foundation for students to make a successful transition to college by: (1) creating a connection to the college community and resources, (2) introducing tools for academic success, and (3) developing personal, academic, and career goals. (Prerequisites: None) (1 hr lec/0 hrs lab/0 hrs OJT)
- Students who have not declared a degree or diploma
- Students who are in a certificate or diploma program of fewer than 37 credits
- Students in good academic standing who have earned 12 credits including an Introduction to College course
- Students in good academic standing who have earned 24 college credits post high school|
Successful entry into this program requires a specific level of skill in the areas of English, mathematics, and reading. Program entry will depend, in part, on meeting the prerequisites listed below:
• Completion of ENGL0460 or its equivalent transfer course or higher.
• If required, ENGL0460 may not be taken concurrently with Semester I coursework.
• A score of 36 or higher on the Elementary Algebra Skills portion of the CPT, OR
• Completion of MATH0450 or its equivalent transfer course or higher.
• If required, MATH0450 may not be taken concurrently with Semester I coursework.
• Completion of READ0465 or its equivalent transfer course or higher.
• If required, READ0465 may be taken concurrently with Semester I coursework.
General Education courses shall be selected from at least three (3) of the ten (10) goal areas of the Minnesota Transfer Curriculum. The general education courses listed below are required and satisfy the MTC goal areas.